Ace ACE-3205, Инструкция по установке и эксплуатации

Страница: 175 / 418

Installation and Operation Manual Chapter 4 Configuration
ACE-3105, ACE-3205 Ver. 5.2 Configuring for Operation 4-85
Table 4-53. VLAN Membership Parameters
Parameter Description Possible Values
VLAN ID ID of the virtual LAN to which the bridge
port belongs.
Note:
• Up to 32 VLANs are allowed.
• A bridge port can be a member of up to
32 VLANs.
1–4095
Egress ports The bridge ports that are members of the
VLAN specified above. Only existing bridge
ports can be listed. 1–3
Setting the QoS Parameters
The bridge's quality of service parameters include the priority classification and
the priority mapping of the bridge traffic.
³
To access the QoS parameters:
• From the Bridge menu (see
Figure 4-58
), select QoS.
The QoS menu is displayed.
ACE-3205 – RAD Data Communications
Configuration> Applications> Bridge> QoS
1. Priority classification > (802.1p)
2. Priority mapping >
>
Please select item <1 to 2>
ESC-previous menu; !-main menu; &-exit
Figure 4-61. QoS Menu
Table 4-54. Bridge QoS Parameters
Parameter Description Possible Values
Priority
classification Type of priority classification, i.e. – the
compliance standard of the frames
transmitted to the Ethernet port. 802.1p
Priority mapping Access the QoS priority mapping See
Figure 4-62
and
Table 4-55