Ace ACE-3105, Инструкция по установке и эксплуатации

Страница: 276 / 418

Chapter 6 Monitoring and Diagnostics Installation and Operation Manual
6-38 Monitoring Performance ACE-3105, ACE-3205 Ver. 5.2
Table 6-26. IMA Group Status and Menu Parameters
Parameter Description Possible Values
NE state Current state of the near end group state
machine
FE state Current state of the far end group state
machine
NE TX clock Clock mode of near end IMA group, CTC only
FE TX clock Clock mode of far end IMA group, either CTC
or ITC
TX IMA ID The transmitted IMA ID
RX IMA ID The received IMA ID
TX frame length IMA frame length in cells of transmitted frames
RX frame length IMA frame length in cells of received frames
Configured TX links Number of links that are configured to transmit
in a group Numerical
Configured RX links Number of links that are configured to receive
in a group Numerical
Active TX links Number of active transmitting links Numerical
Active RX links Number of active receiving links Numerical
Available TX cell rate Current cell rate (cells per second) provided by
the group in transmission direction. Numerical
Available RX cell rate Current cell rate (cells per second) provided by
the group in receiving direction. Numerical
RX timing reference
link The index of the received timing reference link
used by the near end for IMA data cell clock
recovery toward the ATM layer.
TX timing reference
link The index of the transmitted timing reference
link used by the near end to indicate the far
end on IMA data cell clock recovery from the
ATM layer.
Failure status Current failure status of the IMA group
Running seconds Number of seconds since IMA group has been
in operational state. Numerical
Last change The time of day when IMA has changed its
state
Least delay link Index of the link with shortest propagation
delay