Ace ACE-3105, Инструкция по установке и эксплуатации

Страница: 273 / 418

Installation and Operation Manual Chapter 6 Monitoring and Diagnostics
ACE-3105, ACE-3205 Ver. 5.2 Monitoring Performance 6-35
Parameter Description Possible Values
FE RX state Current state of far end receiving link state
machine
FE TX state Current state of far end transmitting link
state machine
FE RX failure
status Current link failure status of the far end
receive link
RX Link ID RX link ID is the link ID used by the far end
Link type The IMA link type to display the status for E1/T1
SHDSL
Link number The IMA link number to display the status
for 1–4/8/16 for E1/T1
1–4 for SHDSL
Default : 1
Displaying the IMA Group Statistics
You can display the statistics parameters of each of the available IMA groups, one
group at a time.
³
To view the IMA group statistics:
• From the IMA menu (see
Figure 6-26
), select Group Statistics.
The current statistics of Group 1 are displayed by default.
Table 6-25
explains the group statistics parameters and other display
options that are available.
ACE-3205 – RAD Data Communications
Monitoring> Applications> ATM> IMA> Group Statistics
Group UAS ... (0)
NE failures ... (0)
FE failures ... (0)
Time elapsed ... (100)
Valid intervals ... (1)
1. Interval ... (0)
2. Group number ... (1)
3. Type ... (E1)
>
Please select item <1 to 2>
ESC-previous menu; !-main menu; &-exit
Figure 6-29. IMA Group Statistics Menu