Ace ACE-3105, Инструкция по установке и эксплуатации

Страница: 225 / 418

Installation and Operation Manual Chapter 4 Configuration
ACE-3105, ACE-3205 Ver. 5.2 Additional Tasks and Options 4-135
Transferring Files via XMODEM
The XMODEM protocol is typically used for local file transfers via the product
unit's RS-232 serial interface. The file transfer is performed directly via the
RS-232 cable and does not involve IP-based connectivity, nor firewall concerns.
Selecting an Operation
The XMODEM file transfer options differ from one product family to another. The
ACE-3105, ACE-3205 product family has 11 different XMODEM file transfer
options, including license and default configuration download.
³
To select an XMODEM file transfer option:
1. When logged into the product via HyperTerminal (for more information, refer
to
Chapter 3
), select Utilities> File utilities> File transfer> X-Modem.
The XMODEM file transfer options are displayed.
ACE-3205 - RAD Data Communications
Utilities> File utilities> File transfer> X-Modem>
1. No operation
2. Software download
3. Software download to backup
4. Configuration download
5. Configuration upload
6. Monitoring upload
7. Boot download
8. Event log upload
9. User file download
10. User file upload
11. License download
12. Default configuration download
>
Please select item <1 to 12>
Figure 4-97. XMODEM File Transfer Options
2. Select the required transfer operation. For more information about each
option, refer to
Table 4-80
.
• A download option means that a file is to be sent from the local computer to
the product unit.
• An upload option means that a file is to be sent from the product unit to the
local computer.
Note