Ace ACE-3105, Инструкция по установке и эксплуатации

Страница: 194 / 418

Chapter 4 Configuration Installation and Operation Manual
4-104 Configuring for Operation ACE-3105, ACE-3205 Ver. 5.2
ACE-3205 – RAD Data Communications
Configuration> Applications> Multiservice over PSN> General> ATM parameters
1. PW Misorder window size >
2. PW Reordering >
>
Please select item <1 to 2>
ESC-previous menu; !-main menu; &-exit
Figure 4-75. ATM Parameters Menu
Table 4-67. ATM Parameters
Parameter Description Possible Values
PW Misorder window
size In packet-switched traffic, some packets are not
received according to their predefined sequence
number. This condition is defined as misorder.
Accordingly, this parameter defines the number of
packets window, in which ACE-3105, ACE-3205
tries to fix the packet sequence misorder errors.
Cannot be changed when PWs exist.
0, 1, 2, 4, 8, 16, 32
Default: 4
PW Reordering To allow proper de-capsulation of ATM traffic,
ACE-3105, ACE-3205 has a mechanism that fixes
misorders by re-ordering the received packets
correctly.
You can enable or disable the reordering
mechanism.
Cannot be changed when PWs exist.
Enable
Disable
Default: Disable
Defining PSN Peers
In a packet-switched network application, ACE-3105, ACE-3205 operates
opposite remote peer devices. Each of these devices must be individually defined
individually on the Peer menu.
An Ethernet router interface and a default gateway must be configured prior to
configuring PSN peers.
³
To access the Peer menu:
•
From the Multiservice over PSN menu (see
Figure 4-74
), select Peer.
The Peer menu is displayed.
Note