Ace ACE-3105, Инструкция по установке и эксплуатации

Страница: 115 / 418

Installation and Operation Manual Chapter 4 Configuration
ACE-3105, ACE-3205 Ver. 5.2 Configuring for Management 4-25
Adding SNMPv3 Notification Entries
You can define which types of notification will be sent to the target management
stations (the target stations are defined separately, as explained in
Configuring
the Target Parameters
).
³
To define notifications:
1. From the SNMPv3 Settings menu, select Targets & Notify.
The Targets & Notify menu is displayed.
2. Select Notify.
The Notify menu is displayed with the details of the first notification (if
exists).
• You can press <F> (Forward) or <B> (Back) to browse through the currently
defined notifications (if such were already defined). The details of one
notification are displayed at a time.
• Notifications can be defined via Terminal access only. By default, two tags are
defined and associated with each notify name according to the default trap
mask.
ACE-3205 – RAD Data Communications
Configuration> System> Management> SNMPv3 Settings> Targets and Notify>
Notify
Type > ()
1. Name ... ()
2. Tag ... ()
>
Please select item <1 to 2>
B – Back; F - Forward
ESC-prev.menu; !-main menu; &-exit
Figure 4-20. Notify Menu (SNMPv3 Settings)
Note