Ace ACE-3105, Инструкция по установке и эксплуатации

Страница: 104 / 418

Chapter 4 Configuration Installation and Operation Manual
4-14 Configuring for Management ACE-3105, ACE-3205 Ver. 5.2
Parameter Description Possible Values
Link up/down Activates or masks the "link up/down" alarm
trap Active
Masked
Default: Masked
LOS Activates or masks the Loss of Signal alarm trap.
LOS is the start or end of LOS event at the
SONET/SDH or ETH physical level.
Active
Masked
Default: Masked
LOF Activates or masks the LOF alarm trap.
LOF is the start or end of LOF event at the
SONET/SDH physical layer.
Active
Masked
Default: Masked
LCD Activates or masks the LCD alarm trap.
LCD is the start or end of LCD event at the
SONET/SDH physical layer.
Active
Masked
Default: Masked
Line AIS Activates or masks the Line AIS alarm trap.
Line AIS is the start or end of Line AIS event at
the SONET/SDH physical layer.
Active
Masked
Default: Masked
Line RDI Activates or masks the Line RDI alarm trap.
Line RDI is the start or end of Line RDI event at
the SONET/SDH physical layer.
Active
Masked
Default: Masked
If “all masked” or “none masked” was previously selected in the Manager List
menu (see
Figure 4-9 ), individual traps cannot be masked or activated.
³
To access the Application layer traps configuration menu:
•
From the Traps menu (see
Figure 4-10
), select Applications.
The following menu is displayed.
Note