Manual (English)
FEATURES
o
Wireless speaker with Micro-SD and Line-In support
o
Bluetooth connection (up to 16 ft.)
o
Integrated Microphone and different calling functions
o
Automatic standby mode
CONTENT
o
Portable Bluetooth speaker
o
USB charging cable
o
Multi-language manual
FUNCTIONS
CHARGING – Please fully charge the device with the included
Micro-USB cable
(7)
before using it.
The LED indicator
(6)
will lighten red during the charging process
and turn off when the battery is full (the charging process should
take around 1 up to 2 hours).
Please note that the speaker will enter a standby mode after 5
minutes without operation to save battery power.
If the battery is low, you will hear a beeping sound every 5
seconds.
ON/OFF – Hold the ON/OFF button
(1)
to turn the speaker on or
off.
BLUETOOTH / LINE-IN / MICRO-SD CONNECTION – Press the
ON/OFF button
(1)
for 3 seconds.
You will hear an audio signal consisting of two beeps and the LED
(6)
will be blinking blue to indicate that the device is waiting for a
connection.
Search for available Bluetooth devices on your smartphone, tablet or PC and select iDrum to connect your speaker. No activation
code is required. If the connection was successful, you will hear another audio signal.
Alternatively, you can also connect your smartphone, MP3-Player or similar devices with a standard audio cable by using the 3.5 mm
slot
(2)
. The speaker will beep two times to indicate that the cable connection has been activated.
If you want to play music from your Micro-SD card, simply place it in the respective slot
(9)
. You will hear two beeping sounds before
the playback starts automatically. If you want to switch back to your already established Bluetooth connection, press the ON/OFF
button
(1)
twice shortly.
PAUSE / PLAY – Push the ON/OFF button
(1)
once to stop or continue the playback respectively.
INCREASE VOLUME / NEXT TITLE – Hold the VOL-PLUS button
(4)
to jump to the next title or press it shortly to increase the volume.
DECREASE VOLUME / PREVIOUS TITLE – Hold the VOL-MINUS button
(5)
to jump to the previous title or press it shorty to decrease
the volume.
ACCEPT / END CALL – Press the ON/OFF button
(1)
shortly to accept an incoming call and or end a call.
Speak into the microphone
(3)
located at the bottom of the speaker.
SPECIFICATIONS
o
Working current / voltage: 3.7 V / 500 mA
o
Charging current / voltage: 5 V / 800 mA
o
Bluetooth version: 2.1+DER
o
Size: 1.7*1.9 in
o
Weight: 1.9 ounces
IMPORTANT DIRECTIONS
o
Do not overcharge the speaker.
o
Stop using the speaker and switch it off immediately if you hear strange noises or if the speaker seems overheated.
o
Do not expose the speaker to moistness (rain) nor high temperatures / flames to prevent shock and explosion hazards.
o
Do not disassemble the device.
o
Do not drop the speaker on the ground and do not use abrasive solvents to clean the speaker.
o
Do not stick anything inside the speaker or the front panel as this may damage internal components.
o
Turn off your speaker and Bluetooth signal prior to boarding an aircraft. Do not use your speaker inside an aircraft.
o
Do not let small children play with the headset to prevent choking hazard.
