AccuStrata, Inc.
11900 Parklawn Dr., Suite 203
Rockville MD 20852
(240) 223-5400 | www.accustrata.com
Quick Start Guide
FLUOROTEK 200
Handheld Fluorometer
2
Setup
Remove battery cover on the back of the Fluorotek 200 by gently pressing
the corrugated section and pulling the cover toward the bottom of the unit.
Install 4-AA batteries on the back side of the Fluorotek 200 in the
orientation drawn on the battery compartment.
Replace the battery cover by inserting it into the groves and pushing it up
toward the top of the unit.
Turn the unit on by sliding the switch on the top right of the Fluorotek 200
to the left.
1
Test Kit Materials
Fluorotek 200 handheld unit
Light-blocking cap for sample holder
USB drive containing PC software and pdf documents for quick start and
user’s manual
Thank you for purchasing the Fluorotek 200 handheld fluorometer. We
are committed to ensuring that the product serves your needs in the best
possible manner. If you need assistance, technical support is available
via the contact information at the bottom of the page. This quick start
guide will help familiarize you with the Fluorotek 200 and guide you
through the measurement steps.
