Manual Part # 800-1402-002 Rev K, 072418
Page 51 of 53
S
ECTION
6
A
CCESSORIES
ProRF allows linear measurement or position data to be
transmitted wirelessly to a PC (or other device with a USB
or RS232 connection.) The system uses 802.15.4 radio
modules to provide reliable two way communication. The
transmitter plugs into the SPC data output connector on the
General Purpose and 950 Series Readouts
Instead of a long cable between the Encoder and the
Readout, a Transmitter at the Encoder sends data to a
Receiver. The receiver can be connected to a Readout
at a remote location or to a PC RS232 or USB port.
(Not compatible with 950 Series systems)
ProMUX-3 is an easy to use hardware interface that
provides communication from Model 150 & 250 Encoders
(or SPC equipped readouts
) to a user’s PC or PLC.
ProMUX-3 supports three inputs, and one RS232 output.
(Not compatible with 950 Series systems.)
Analog Interface Unit (AIU)
The AIU is an interface designed to provide an analog
signal output proportional to the displayed position of a
ProScale measurement system. It connects to the SPC
data output connector on the General Purpose and 950
Series Readouts.
