ProPanel-HD (FW4), Revised August 2020
Page 15 of 24
Supplemental key functions
The digital readout supplied with ProPanel has a
supplemental keypad that allows additional features to be
used. See below for functions of these keys:
Key
Quick press action
Press and hold action
ABS/INC
When in ABS mode, no action.
When in INC mode, the INC value
is reset.
When in ABS mode,
toggles readout to INC
mode.
When in INC mode,
toggles readout back to
ABS mode.
SEND
The currently displayed value is
sent to the SPC data port.
None
F1
An offset value is applied.
(If offset
feature is enabled in the
programming menu).
Also used to store compensation
point data in Enhanced Readouts.
None
F2
Used to set compensation end
point for Enhanced Readouts.
None
F3
Turns Monitor mode on or off.
(If
monitor feature is enabled in the
programming menu.)
Starts editor for Go/NoGo editor.
(If
Go/NoGo feature is enabled.)
None
F4
Turns HOLD mode on or off.
(If
hold feature is enabled in the
programming menu.)
Edits values in Go/NoGo editor.
(If
Go/NoGo feature is enabled.)
None
