Acculab ACCULAB VICON VIC-123, Руководство по эксплуатации

Страница: 16 / 16

16
Product Order No.
Data interface, mounting kit
– RS-232 interface with cable YADAP-RS
– USB interface with cable YADAP-USB
Data printer YDP03-0CE
Lock-down capability LC-1
(for anti-theft locking device)
Calibration weights
– for VIC-5101 (5 kg; F2)
YCW6548-00
– for VIC-3101 (2 kg; F2) YCW6248-00
– for VIC-1501 (1 kg; M1) YCW615-00
– for VIC-10KG (5 kg; M1) YCW655-00
– for VIC-6KG (5 kg; M2) YCW656-00
– for VIC-4KG (2 kg; M2) YCW626-00
– for weight compartment,
(right side), (100 g;F1) Available on request
Product Order No.
In-use cover:
– for models without glass draft shield Available on request
– for models with glass draft shield
Available on request
Round glas draft shield Available on request
(25 mm high)
Weighing pan: – Round Available on request
– Rectangular Available on request
Pan support: – Round Available on request
– Rectangular Available on request
Leveling feet (set of one
adjustable foot and one fixed foot) Available on request
Plug for level indicator port
Available on request
Covers:
– Battery compartment Available on request
– Interface port Available on request
– Below-balance/scale port Available on request
Weight compartment Available on request
Accessories (Options)
C Marking
The balance/scale complies with the following EC Directives
and European Standards:
Council Directive 89/336/EEC “Electromagnetic
compatibility (EMC)”
Applicable European Standards:
Limitation of emissions:
In accordance with product standard EN 61326-1 Class B
(residential area)
Defined immunity to interference:
in accordance with product standard EN 61326-1
(minimum test requirements, non-continuous operation)
Important Note:
The operator shall be responsible for any modifications to
Acculab equipment and must check and, if necessary, correct
these modifications.
On request, Acculab will provide information on the minimum
operating specifications (in accordance with the Standards
listed above for defined immunity to interference).
73/22/EEC “Electrical equipment designed for
use within certain voltage limits”
Applicable European Standards:
EN 60950
Safety of information technology equipment including electrical
business equipment
EN 61010
Safety requirements for electrical equipment for measurement,
control and laboratory use
Part 1: General requirements
If you use electrical equipment in installations
and under ambient conditions requiring higher safety standards,
you must comply with the provisions as specified in the
applicable regulations for installation in your country.