Acuvim-L Series : L-WEB User manual
www.accuenergy.com
V: 1.0 Revised: Sept. 2019
54
Click 'Save' after changing any settings. Users will be prompted to reboot the L-WEB
immediately or later. If later is chosen the L-WEB must be rebooted from the
'Management' page in order for the configurations to take effect.
Time/Date
The device clock of the Acuvim L series meter can be set through the web interface of
the L-WEB module. The L-WEB module also supports the SNTP (Simple Network Time
Protocol) protocol so that the module can update the meter's device clock by synchro-
nizing with a time server.
The module can sync with up to 3 time servers. If a time server is down, the module will
synchronize with the second or third time server if they are configured.
The settings for the time and date can be found by clicking on the 'Settings' and se-
lecting the 'Communications' tab. Users can select 'Time/Date' to configure the time
settings.
