4
Setting up your ACD-52300 IP address
Default Login
Name: admin
Password: accudual
After you have successfully calibrate your monitor, now you have to setup a
static IP address so the users can access ACD-52300 through this IP address
and do the RCM (Remote Control Management) operation
p.s. please do make sure you re-connect ACD-52300 to the LAN after the initial
configuration of IP address setting
Here below are the instructions to setup your IP address on the ACD-52300
1.
Prepare a PC(notebook) and connect it via an Ethernet cable to ACD-52300
LAN port.
2.
Disable the wireless interface of the PC.
3.
Open a browser. Enter the URL
, and login page appears.
4.
Follow the prompts to change the default password.
5.
DHCP is now enabled by default.
6.
To change network settings to a static IP address: Choose Device Settings >
Network.
7.
Select “Static” then setting your IP address XXX.XXX.XXX.XXX/24 and
Gateway
Содержание ACD-52300
Страница 1: ...ACD 52300 User Guide v1 1...
