7
A
2
1
3
4
F
E
5
6
7
8
D
B
C
1.1. Control panel
1. Instructions for the user
fig. 1
A.
Select operation type (Winter / Summer / Off).
B.
Reset alarms and return to the home page on the parameters selection screen.
C.
Adjust heating hot water.
D.
Adjust domestic hot water.
E.
Decrease temperature values and parameters.
F.
Increase temperature values and parameters.
To access the interface press a key. Upon activation, the interface enables access to all keys as well as the back lighting of the display. 30
seconds after having touched it, the interface disables all buttons and the display goes off.
If the key is hold for over 30 seconds, it is displayed a fault message but the system operation is not stopped. The error is reset once the
normal conditions are restored.
