15
5.5
ACCESSING THE INNER PARTS
5.5.1
Mod.
HPE R32
06 / 08
1) Remove the cover
2) Undo the screws (number 2; 3; 4) of the sheet metal cover of the user interface and the screw (number 1) of the side panel to separate
the front sheet metal from the side panel (Detail A).
3) Undo in sequence the screws (number 5; 6;7) in order to move the front panel slightly forward and to be able to reach the screw
(number 8) visible in detail B.
4)
Undo the screws (number 8; 9 visible in detail B) and those on the coil side of the unit. To remove the side panel, pull it upwards (to free
the tab at the base indicated as C in detail B) and remove it.
5.5.2
Mod.
HPE R32
10 / 10T / 12 / 12T
1) Remove the cover by undoing the screws (number 1; 2; 3; 4; 5; 6; 7; 8).
2) Undo the screws (number 9; 10) of the front sheet and then push the panel downwards to remove the tabs (Detail A); pull the panel
forward to remove it.
3)
Undo the screws (number 11; 12;13) and those on the coil side of the unit. To remove the side panel, pull it upwards (to free the tab at
the base indicated as C in detail B) and remove it.
DETAIL A
SCALE 1 : 3
DETAIL B
SCALE 1 : 4
Interlocking tab
Interlocking tab
DETAIL B
SCALE 1 : 5
