ACCO Brands NOBO S15E, Руководство пользователя

Страница: 27 / 31

The projector will detect the lamp life itself. It will show you a warning
message “Lamp may fail soon ! Replacement Suggested !” When you see this
message, change the lamp as soon as possible.
Make sure the projector has been cooled down for at least 30 minutes before
changing the lamp.
28
A P P E N D I C E S
REPLACING THE LAMP
Lamp compartment is
hot! Allow it to cool
down before changing
the lamp!!
WARNING
Ì
!
To reduce the risk of
personal injury, do not
drop the lamp module
or touch the lamp bulb.
The bulb may shatter
and cause injury if
dropped.
WARNING
Ì
!
Lamp Changing Procedure:
1
Turn off the power to the projector by pressing the Power button.
2 Allow the projector to cool down at least 30 minutes.
3 Disconnect the power cord.
4 Use a screwdriver to remove the screw from the cover (
)
.
5 Push up and Remove the cover (
)
.
6 Remove the 3 screws from the lamp module (
)
.
7 Pull out the lamp module (
)
.
To replace the lamp module, reverse the previous steps.
4
3
2
1
1
2
3
4