Acclaim Lighting Unity SNS2019, Руководство пользователя

Страница: 33 / 56

31
DETERMINING SOLO BEHAVIOR
You can choose how the fixture should behave when it is running solo, either because an
external control input is not being used at all or because a connection has been temporarily
lost.
Note: The solo behavior can also be configured via RDM, see page 41.
There are three solo behavior choices:
• Black Out
- In this mode, when no external control is present, the emitter output will be
extinguished.
•
Internal Color Mode
- In this mode, when no external control is present, the fixture can
be made to show a pre-programmed static color. Ensure that a color mix (or selected
white) output setting is stored within the
Internal Color
option (see below).
•
Hold Last DMX Value
- In this mode, when no external control is present, the emitter
output will remain as per the last received instruction.
TO DETERMINE THE SOLO BEHAVIOR
1 Enter the user menu (see page 26).
2 Use the or buttons to locate the
Solo Behavior
option and press ENTER . The
display will show the currently selected solo behavior mode .
3 Use the or buttons to show the required solo behavior mode and press ENTER .
SETTING AN INTERNAL COLOR
This option allows you to mix a static color (or selected white) which will be displayed
whenever the following two criteria are met:
•
The
Solo Behavior
option is set to
Internal Color Mode
(see above)
,
and
•
There is no DMX input signal.
TO SET AN INTERNAL COLOR
1 Enter the user menu (see page 26).
2 Use the or buttons to locate the
Internal Color
option and press ENTER .
3 Use the or buttons to locate the required color/intensity sub-option.
4 Press
ENTER .
5 Use the or buttons to change the dimming setting and press ENTER .
Tip: In 7 channel mode, the intensity level must be above zero in order to see any output.
6 Repeat steps 3 to 5 until the required overall color output is achieved.
FAN MODE
The internal automated cooling fan ensures that the LED emitters and control circuitry
remain safely within operational limits. Auto is the default mode and allows optimum fixture
output.
Selecting Quiet mode will reduce the fan speed, with a corresponding reduction
in maximum output, which could be up to 20% less than in Auto mode
.
TO CHANGE THE FAN MODE
1 Enter the user menu (see page 26).
2 Use the or buttons to locate the
Fan Mode
option and press ENTER . The display
will show the currently selected setting .
3 Use the or buttons to change the setting and press ENTER .