Actions
Programming the show controller involves adding action-list and specifying actions.
Action-lists
In the Action-lists table you can include the sources you will be using in your project. You can choose
from input sources like: DMX, Art-Net, MIDI, GPI, Time-code, Scheduler & OSC. Each source may exist in
the table only once, with a maximum of 8 sources in total. Each Action-list can be enabled and disabled.
The available sources are:
Touch Screen
Triggers from the aTouch software tool.
Art-Net
Trigger on reception of Art-Net or convert Art-Net universes to DMX.
DMX In
Convert to complete universe to Art-Net or trigger by individual DMX channels. Only 50
channels are monitored for individual triggering, starting -by default- at channel 1. You can
change this starting channel in the settings page.
MIDI
Trigger by or convert from incoming MIDI messages like Notes, Control Changes or
Program Changes.
Timecode *
Trigger by exact timecode frames. You specify the timecode protocol in the settings page.
Scheduler *
The inbuilt RTC allows triggering on time, day, weekday and sunrise/sunset.
System
Miscellaneous triggers like 'OnStartup'
OSC
Incoming OSC messages
GPI
State changes on the onboard GPI port.
Variable
Changes of the variable values.
Recorder *
State changes of the recordings like 'OnEnd'
Console *
State changes of the console.
Randomizer
The Randomizer can randomly trigger actions.
User List
An actionlist without any source, can be used to 'link to'.
* Indicates a source only available on the Art SSC.
24
