Acclaim Lighting aria Dyna Accent, Руководство пользователя, Страница: 26 / 42

24
www.acclaimlighting.com
RUNNING A SYSTEM TEST
This option assists in testing all of the emitters. When engaged, the emitters will flash on and
off. Color models will cycle in turn through the various emitter colors.
Note: You can also test the emitters remotely via RDM, see page 32.
TO RUN A SYSTEM TEST
1 Enter the user menu (see page 19).
2 Use the or buttons to locate the
System Test
option and press ENTER . The fixture
will change between emitter outputs. The user display will flash
Testing......
while the
test proceeds.
3 Press either the MENU or the ENTER buttons to halt the test.
SETTING A WHITE BALANCE
Note: White balance is only possible on Dyna Accent color models.
White balance is useful when your Dyna Accent installation will be required to regularly
present particular shades of white using the R, G, B emitters, (plus the white emitters, if
necessary). Using the white balance feature you can ‘bias’ particular colors so that when the
R, G and B channels are all brought up, your pre-programmed bias will achieve, for example,
a balanced warm white derived from a significant red output, with a moderate green
output, while the blue is scaled back.
To achieve identical white balance across a collection of fixtures, you will need to program
the same settings on each Dyna Accent unit.
TO SET A WHITE BALANCE
1 Enter the user menu (see page 19).
2 Use the or buttons to locate the
White Balance
option and press ENTER . You
now have access to the separate
Red
,
Green
and
Blue
options, which are all set to 255 by
default.
3 Use the or buttons to choose a color and press
ENTER
.
4 Use the or buttons to reduce the chosen color from 255 down to a minimum of 125
to reduce the intensity of that color, and press ENTER to save.
5 Repeat step 4 for each color that needs to be biased to achieve the required balance.
TO CANCEL A WHITE BALANCE
1 Enter the user menu (see page 19).
2 Select the
White Balance
option. In turn visit each color and ensure that they are all
returned to 255.