Inserting the battery
Locate the
(3) Rechargeable battery compartment
on the back of the
(a) LightLINK
camera light.
Open the
(4) Rechargeable battery compartment door
and insert the
(c) OL40B Li-Ion battery
so that the (+/-) battery contacts are in line with the (+/-)
metal contacts inside the
(3) Rechargeable battery compartment.
Then, close the
(4) Rechargeable battery compartment door.
To illuminate the (1) LED bulbs, locate
the
(2) On/Off switch
on the back of the
(a) LightLINK camera light
and switch it to
the ON position.
Recharging the battery
Remove the
(4) Rechargeable battery compartment door
and take out the
(c) OL40B Li-Ion battery.
Insert the
(c) OL40B Li-Ion battery
in to the
(d) AC charger
so
that the (+/-) battery contacts are in line with the charger contacts. Pull out the
(5) Flip-down AC plug
and plug the charger in to your wall outlet. When the
(d) AC charger
is charging the
(6) Battery charger LED
will glow RED. When the
charge is complete the
(6) Battery charger LED
will glow GREEN and then turn off .
Using the (12) LightLINK expansion slots
You can expand your
(a) LightLINK camera light
with additional units to make dif-
ferent lighting confi gurations. To expand your
(a) LightLINK camera light,
connect
additional units by inserting their
(7) Hot shoe foot
into one of the three
(11) LightLINK expansion slots
with the
(8) Hot shoe collar
loose and the
(1) LED bulbs
facing forward. Once the
(7) Hot shoe foot
is inserted into the
(11) LightLINK expansion slot,
tighten the (
8) Hot shoe collar
by turning clockwise
until the
(a) LightLINK camera light
is locked fi rmly into place.
Operating Instructions
(continued)
:
