6
VITAL Installation and User Guide
CONFIGURATION
INPUT VERIFICATION
ENTER HOUR METERS
Step 1:
Press the “MENU” button (gear icon).
Step 2:
Enter password given and then press “OK”
(check mark icon).
Step 3:
Use the arrow keys to navigate to the
“Input
Status” option on the screen.
Step 4:
Toggle input indicated on display. Based on the
state of the input, it should say
either “ON” or “OFF”.
Step 5:
Check the next input using the arrow keys.
Note:
If Inputs are sensed backwards, change its logic
from Active High to Active Low or vice versa
in “Input
Settings”.
Step 1:
Install device as per the connection diagram (on
page 5).
Step 2:
Ensure device is powered up by removing top
cover. Display should say “System OK”.
Step 1:
Using the arrow keys navigate to the “Hour
M
eters” option.
Step 2:
Press “OK” to edit the reading.
Step 3:
Enter the new reading and press “OK”.
Step 4:
Edit the next input using arrow keys.
