Page
11
of
14
Copyright © Access-IS 2017
4. Operation
To read a barcoded boarding pass, place the document face up into the barcode reader zone. As
soon as a document is detected, the barcode reader’s LEDs will illuminate the document.
Note: The BGR700 will automatically illuminate a barcode on a mobile phone or PDA at a lower
level than a barcode on a paper document.
The barcode imager is omnidirectional, and a well-printed document should be read almost
immediately.
Better read performance will be achieved if the document is held flat on the surface under the
barcode reader.
The boarding application determines if the document is valid, and the BGR700 sends a message to
the operator message display. Either the green LED (OK to Board) or the red LED (Do Not Board) is
illuminated.
If the BGR700 does not appear to be working:
•
Contact
Customer Support
(
) for further assistance.
Alternatively, use the
Contact Customer Support
page on the Access-IS website.
Note: Do not attempt to disassemble the BGR700 if it does not operate correctly. Any attempt to do
so may be dangerous and will invalidate the warranty.
