READ ME FIRST – SETUP INSTRUCTIONS
Thank you for purchasing the Accell UltraAV HDMI Distribution
Amplifi
er. This product is designed to provide an exceptional
performance and value. Please review the manual before
operating and retain for future reference.
- CAUTION -
1. Ensure the unit has suf
fi
cient
ventilation. Do not cover
ventilation openings. Do not install
in a confi
ned space.
2. Do not operate near source
of heat. Do not stack on top,
underneath or between other heat
generating unit/s including other
amplifi
ers.
3. Unplug power adapter if not
used for an extended period.
4. To prevent damage from power
surges, the unit should be plugged
into a surge protector or surge pro-
tected power source.
5. Do not use near liquid or areas
of heavy moisture.
6. Clean unit with a clean and dry
cloth only.
7. This unit cannot be serviced in
the
fi
eld. Contact Accell if service is
required.
8. Do not open case, risk of shock -
shock hazard.
9. Do not modify power cord or use
the product if the power cord is
damaged.
Introduction
The UltraAV HDMI Matrix and Distribution Amplifier accepts signala from
multiple HDMI enabled audio/video sources and distributes the signal
to up to 2 (4x2 Matrix) or 4 (2x4) HDMI enabled displays. The matrix
can be configured to send any input to any HDMI displays, monitors,
projectors or TV’s.
Over-Current and Over-Voltage Protection
The circuit boards are equipped with both over-current and over-voltage
protection and will automatically power down if encountered. The circuit
boards will restore automatically once the excessive current or voltage
has passed.
Package Contents
●HDMI Distribution Amplifier (Matrix)
●
Power Adapter
●R
emote Control (with battery)
●
Owner’s Manual
2x4 HDMI Distribution Amplifier and Matrix
Model: K072C-011B
Specifi
cations
● Independently access 2 HDMI Sources from 4 HDMI
Displays
● Supports HD resolutions up to 1080P and 3D
● HDMI 1.4a, HDCP 1.2 compliant
● Input video signal: 5v p-p, Input DDC signal: 5v p-p (T
TL)
● Data tr
ansfer speed of 6.75Gbps (2.25Gbps/channel)
● Deep color up to 36-bi
t
● Audio formats supported:
DT
S-HD 7.1, Dolby T
rue-HD 7.1
● Maximum input cable length: Up to 20m (24A
WG)
● Maximum output cable length: Up to 20m (24A
WG)
● Shelf or surface mountabl
e
● 5V DC, UL Listed power adapter
● Approximate dimensions: 10.9”W x 1.1”H x 6.1”D
277W x 28H x 156D mm
● Oper
ating temperature r
ange: 5 to 131°F (-15 to 55°C)
● Oper
ating humidity r
ange: 5% to 90% RH (no condensation)
Model Numbers:
K072C-011B (2x4)
K072C-012B (4x2)
UltraAV
®
HDMI Matrix and
Distribution Amplifier
B
4x2 HDMI Distribution Amplifier and Matrix
Model: K072C-012B
Speci
fi
cations
● Independently access 4 HDMI Sources from 2 HDMI Displ
ays
● Supports HD resolutions up to 1080P and 3D
● HDMI 1.4a, HDCP 1.2 compliant
● Input video signal: 5v p-p, Input DDC signal: 5v p-p (T
TL)
● Data tr
ansfer speed of 6.75Gbps (2.25Gbps/channel)
● Audio formats supported:
DT
S-HD 7.1, Dolby T
rue-HD 7.1
● Deep color up to 36-bi
t
● Maximum input cable length: Up to 20m (24A
WG)
● Maximum output cable length: Up to 20m (24A
WG)
● R
ack shelf or surface mountable
● 5V DC, UL Listed power adapter
● Approximate dimensions: 10.9”W x 1.1”H x 6.1”D
(277W x 28H x 156D mm) 5 to 131°F (-15 to 55°C)
● Oper
ating temperature r
ange: 5 to 131°F (-15 to 55°C)
● Oper
ating humidity r
ange: 5% to 90% RH (no condensation)
The 4x2 matix features analog stereo outputs and a TO
SLINK fiber
optical digital audio output. Only one output is functional at any given
time. The primary output is the T
OSLINK output. Connect an audio
output to your audio receiver.
The audio output provides audio from source device used by Output 1. If
Output 1 is switched to Input 3, the audio from Input 3 will be provided.
4x2 HDMI Distribution Amplifier and Matrix
Audio Output
Setup
With the matrix power switch in the OFF position, connect an HDMI High
Speed cable from the HDMI Output of the most commonly used audio/
video source to the HDMI Input 1 located on the rear of the matrix.
Similarly
, connect the remaining source devices to the HDMI Input Ports
on the matrix.
Tips: Use the shortest length HDMI cables possible in each point
in the installation. Use only High Quality and High Speed HDMI
cables.
Next, connect an HDMI cable to the HDMI Output
Port 1 on the rear of
the matrix. Connect the other end to the HDMI Input Port of the display
device. Similarly
, connect the remaining HDMI Output Ports from the
matrix to the other displays.
The matrix has internal memory that stores the system
information for faster switching. Please follow the steps in the
order listed:
T
urn ON the displays and ensure they are awake (not in
standby mode). Check the displa
ys INPUT setting to ensure the correct
HDMI port is active.
Turn on the source devices and ensure they are awake (not in standby
mode). Connect the power adapter to the matrix. Plug the power
adapter into a surge protected AC power outlet. Turn the matrix power
switch to the ON position.
The matrix has a low power draw and is intended to be left on. If
the matrix is turned off, start up the system as noted above. If new
hardw
are is added, please perform a RESET
.
To
RESET the matrix, turn off the display and source devices.
Power off
the matrix and unplug the power adapter from the rear of the matrix.
Wa
it 20 minutes for the memory of the system configu
ration inside of
the matrix to be deleted.
Fo
llow the setup instructions above to correctly
initiate the setup.
