Accedian EtherNID EE Скачать руководство пользователя страница 177

Страница: 177 / 206

10: Traffic Shaper

10 Traffic Shaper

Traffic shaper configuration

NOTE: Traffic shaper is only available on the MetroNID TE / TE-S models.

This is the main tab used for traffic shaping, configuration and monitoring functions.

Traffic shaper menu

•

Port: This option allows the user to configure the global traffic shaping parameters for the outgoing port .

•

Map: This option allows the user to edit the PCP to shaper map. It should be noted that the PCPs are output by
the Service Mapping module.

•

Statistics: This option shows the CPU, loopback and Traffic generator traffic statistics.

•

BLUE statistics: This option provides statistics on queue management.

Traffic shaper configuration

•

Name: Unique name assigned to this shaper.

•

State: State of the Shaper (Enabled/Disabled).

Содержание EtherNID EE















































































































































































































Результаты поиска

Содержание EtherNID EE

Отзывы:

Accedian EtherNID EE, Руководство администратора, Страница: 177 / 206

Результаты поиска

Содержание EtherNID EE

Отзывы: