9: Performance Assurance Agent
•
Disabled:
This probe is disabled. To enable it, click the probe name and then select the
Enable PAA probe
checkbox.
•
Associating:
Probe is looking for peer.
•
Associated:
Peer was found.
•
Running:
Running one time measurement.
•
Idle:
Idle after one time measurement completed.
•
Locked IS:
Locked traffic in service.
Period:
Interval at which measurement packets were issued.
Packet loss
This section provides Packet loss statistics, the amount of gaps in the sequence number and the maximum gap size.
One-way delay variation
Two-way delay variation
•
Instantaneous DV:
Instantaneous delay variation value in microseconds.
•
Minimum DV:
Minimum delay variation in microseconds over one period.
•
Maximum DV:
Maximum delay variation in microseconds over one period.
•
Average DV:
Average delay variation in microseconds over one period.
•
Nbr threshold exceeded:
Number of times the threshold was exceeded.
One-way delay
Two-way delay
•
Instantaneous delay:
Instantaneous delay value in microseconds.
•
Minimum delay:
Minimum delay microseconds over one period.
•
Maximum delay:
Maximum delay microseconds over one period.
•
Average delay:
Average delay in microseconds over one period.
•
Nbr threshold exceeded:
Number of times the threshold was exceeded.
Содержание EtherNID EE
