AC Mobility
User Manual for the Atigra Mid Wheel Drive electric wheelchair
Page
11
of
23
January 2009
Armrest side
panels
Armrest side panels are provided in the T2 seat. They
are not height or position adjustable.
Please note that customized armrest side panels can
be provided if the standard panels are not suitable
Adjustable seat
rake angle
The seat rake of the T2 seat can be adjusted from 0 degrees to +10 degrees.
A
17
MM OR AN ADJUSTABLE SPANNER IS REQUIRED TO MAKE THIS ADJUSTMENT
.
Swing away,
removable
legrests
The legrests can be swung away and/or
removed if required.
To remove the legrest
•
Push the legrest release lever to release
the legrest catch
•
Swing the legrest away
•
Lift the legrest off the mounting points
if required
Adjustable
footplates
The footplates can be adjusted in the following ways:-
•
Height – approx 10 cms. The nominal range is
from 33 cms to 49 cms from the top of the seat
side rail. This can be customized if required.
A
14
MM SPANNER IS REQUIRED TO MAKE THIS
ADJUSTMENT
.
L
OOSEN THE BOLT AT THE BASE OF THE
LEGREST HANGER
,
ADJUST THE FOOTPLATE TO THE
DESIRED HEIGHT AND RE
-
TIGHTEN THE BOLT
.
•
Dorsiflexion and plantarflexion to allow
for foot angle. The range adjustment is
+/- 90 degrees.
A
3
MM AND A
4
MM
A
LLEN KEY IS REQUIRED
TO MAKE THIS ADJUSTMENT
.
LOOSEN THE
FOOTPLATE FASTENER BOLTS ON EACH PLATE
,
ADJUST THE PLATE ANGLE AS DESIRED AND RE
-
TIGHTEN THE FOOTPLATE FASTENER BOLTS
