25
4. Align the center tube and the end numbered tube insert so they are concentric with one
another. Insert the T-Handle pin into the number previously recorded from the T1H3 short
Adjuster end and connect both the center tube and end numbered tube together.
Center Tube
End Numbered Tube
T-Handle Pin
Number will vary and should be
the same as the T1H3 Front Ad-
juster End
Adjust to number on front
T1H3 Short Adjuster Mid-Section
5. Insert the T1H3 Long Adjuster End Numbered tube into T1H3 Roller Long Block and align the
two threaded holes with the thru holes on the Left Back-end assembly. Screw in (2X) 1/4”-20
Socket Head to secure the Long Adjuster assembly to the Left Back-end Assembly.
T1H3 Left Back-end Assembly
(2X) 1/4”-20 Socket Head
Part # 95117
Fully Assembled T1H3 Back-end
