ABX Pentra 80 RAB108EA, Руководство пользователя

Страница: 63 / 306

Quality Assurance
Quality control
Pentra 80 - User Manual - RAB108EA
3–7
1.3. QC data screen grid
From the L.J. graphs screen, use the «Details» key to display the «QC data screen grid».
▼ Analyses results
Results are displayed in red when they are greater than the upper limits, in blue when they
are lower than the lower limits.
Rejected analyses are not stored in QC! A notification of rejection is entered in the
logs
▼ Statistics
For selected results:
◆ Mean values are displayed in red when they are greater than than the upper limits, in blue
when they are lower than the lower limits.
◆ The coefficients of variation are displayed in red when they are greater than the coeffi-
cients set by the operator (See Section 5, 3.4. Coefficients of variation ranges , page 5-
12)
◆ When a Quality Control parameter is out of range, a QC alarm is activated (See Section 4,
5.3.11. Statistical function flags , page 4-46)
1- Check boxes: select/
deselect QC data.
2- Operator that processed
the control runs
3- Date and time that the
QC run was processed
4- Filter: (DIFF, CBC or All
parameters)
5- Use sliders to view all
parameters
6- This field will display all
comments associated with
the specific QC run (Click on
the individual results line so
that it will display it in
«Grey»)
7- This field shows the
number of QC runs selected
from the Check boxes
Fig. 3–4 QC grid screen
1 2
3
4
5
6