Abus SHBW10000 Скачать руководство пользователя страница 4

 

English 

 

Information on handling batteries 

 

Make sure that batteries are kept away from small children. Children may put batteries in their 
mouths and swallow them. This can cause serious harm to their health. If this happens, consult 
a doctor immediately.

 

 

Do not charge normal batteries, heat them up or throw them into naked flames (they may 
explode). 

 

The battery must not be directly exposed to heat or sunlight, and must not be stored in a place 
with a very high temperature. 

 

The battery must not come into contact with water. 

 

The battery must not be dismantled, pierced or otherwise damaged. 

 

The battery contacts must not be short-circuited. 

 

Change low batteries in good time. 

 

Always change all the batteries at the same time and use batteries of the same type. 

 

Leaky or damaged batteries can cause chemical burns on contact with the skin. In this case, 
wear protective gloves. Clean the battery compartment with a dry cloth. 

 

Important information on battery disposal 

Batteries with this label do not contain harmful substances such as cadmium, lead and 
mercury. However, used batteries must not be disposed of along with household waste 
in accordance with the battery directive. To protect natural resources and promote the 
recycling of materials, separate the batteries from other waste and deposit them at a 
local recycling center. An additional label with the chemical symbols for Hg, Cd or Pb 
means that the batteries contain quantities of mercury, cadmium or lead which exceed 
the restrictions set by the EU Directive 2006/66/EG. If batteries are not disposed of 

properly, these substances can cause harm to human health or the environment 

 

Cleaning 

 

Dusty devices must be cleaned. You can clean dust from the air vents using a vacuum cleaner 
or compressed air. If necessary, you can remove the dust with a brush. 

 

You can clean the surface using a cloth slightly dampened in soapy water. Only use suitable 
microfiber cloths for high-gloss surfaces. 

 

Do not allow water to penetrate the device. 

 

Do not clean the device in a dishwasher. 

 

Do not use sharp, pointed, abrasive or corrosive cleaning materials or hard brushes. 

 

Do not use chemicals. 

 

Do not use flammable liquids for cleaning the device.  

 

Information on device disposal 

Important: The EU Directive 2012/19/EU regulates the proper return, treatment and 
recycling of used electronic devices. This symbol means that in the interest of 
environmental protection the device must be disposed of separately from household or 
industrial waste at the end of its service life in accordance with applicable local legal 
guidelines. Disposing of used devices can be done at official recycling centers in your 
country. Obey local regulations when disposing of material. Further details on returns 
(also for non-European countries) can be obtained at your local authority. Separate 

collection and recycling saves natural resources and ensures that all the provisions for protecting health 
and environment are observed when recycling the product. 

 

 

Содержание SHBW10000
















Отзывы: