Maintenance
54 |
E N
The sounder should be checked once a year. During every inspection:
•
Check the sounder for visible signs of damage on the housing or the front cover.
•
Check the condition of the housing-tampering switch and the wall-tampering switch (wall-
removal contact)
•
Check the condition of the backup batteries
•
Check the cabling for visible signs of damage or wear
•
Clean the sounder
o
When cleaning the surface, use a soft, dry cloth.
o
Do not use any water, solvents or cleaning agents.
•
Check the signal strength
•
Check the charging status of the batteries
•
Replace the batteries when recommended by the manufacturer
•
Test the sounder
•
Test the communication.
•
EN 50131-7 "Alarm systems
– intrusion and hold up alarms – part 7: application rules" must
also be taken into consideration.
It is not necessary to check any calibrations or adjustments.
Maintenance by the user
•
Clean the sounder
o
When cleaning the surface, use a soft, dry cloth.
o
Do not use any water, solvents or cleaning agents.
•
The user does not need to carry out any other maintenance work.
