Abus AZWG10200 Скачать руководство пользователя страница 32 | Manualshive

Страница: 32 / 40

Abus AZWG10200 Скачать руководство пользователя страница 32

GSM

The GSM diagnostics are provided on the left-hand side. A green indicator
means that there are no errors.

On

GSM module enabled

PIN

PIN code matches SIM card

Reg

SIM card is registered on the network

GPRS

SIM card has received an IP address and can connect via

IP
Receive

GSM is set up to receive (only possible in closed

networks)

Signal strength
This value is refreshed within a few seconds and provides the option of
determining the optimal position of the antenna.

0% - 16% (red) -> very weak antenna signal
16% - 25% (yellow) -> very weak but usable antenna signal
25% - 35% (green) -> moderate antenna signal
35% - 67% (green) -> good antenna signal
67% - 100% (green) -> strong antenna signal

Version

Software version of the GSM module

Own IP

IP address received from the GSM network

IMEI

Serial number of the GSM module

ICCID

SIM identification number

Number

GSM call number, if not blocked

Provider

Provider through which the AZWG10200-PSTN/IP

CONVERTER has established a connection, if not blocked

Consumption

Display of sent and received bytes from today and

yesterday

Clock

Status of date and time synchronisation. The background colour indicates
the status:

Green Clock is correctly set and synchronisation is possible
Yellow Clock is correctly set but no time server is programmed
Red

Clock is not set and is not (yet) synchronised (when
restarting it may take some time before synchronisation
is complete)

Ethernet/LAN

The LAN/(Ethernet) diagnostics are provided on the right-hand side. A
green indicator means that there are no errors.

On

Ethernet/LAN module is active

LAN

LAN/network cable connected

ETH

Ethernet active, valid MAC address

IP

IP address received from the network, DHCP OK

DHCP

DHCP settings active

Own IP

Assigned or set IP address

«
...
30
31
32
33
34
...
»

Содержание AZWG10200









































Отзывы:

Нет отзывов