*Specifi cations are subject to changes without notice.
User Operation Guide
PRODUCT FEATURES
FRONT/REAR PANEL (HDBT-GAHD11T/AP1)
FRONT/REAR PANEL (HDBT-GAHD11R/AP1)
DESCRIPTION
The
HDBT-GAHD11T/AP1
&
HDBT-GAHD11T/AP1
is a pair of automatic switcher that switches
and scales input from multiple formats to output onto a display via HDBaseT.
It is able to automatically detect and switch input signals from HDMI, Display Port and VGA based
on manual selection or last connected input. The signal will be automatically scaled and passed
through a single CAT-5 cable using HDBaseT technology to the display (or receiver) up to 70m.
Bi-directional IR and RS-232 commands can also be passed through the same cable to control
the source and display. Power over cable is also supported, allowing the receiver or transmitter to
power up without connecting to a power adaptor.
The HDBT-GAHD11T/AP1 & HDBT-GAHD11T/AP1 also comes with a 8 pin 2.54mm connector for
convenient integration with ABtUS IFP-600 series of modular interface panels.
●
Automatic input detection &s election
(Based on manual selection or last connected input)
●
Supports up to 4K 2K resolutions
●
Scaled video output to 1080p @ 60Hz
●
Extends HDMI / VGA up to 70m
●
Supports bi-directional IR and RS-232
●
Support POC (power over cable)
Front View
Front View
Back View
Back View
1
1
2
2
3
3
4
4
6
6
5
5
Item Description
1 IR OUT
IR passthrough from receiver
2 HDMI IN
HDMI input
3 IR IN
IR passthrough to receiver
4 DC 24V
Power 24V DC
(Note: Power adaptor is supplied with transmitter HDBT-GAHD11T/AP1)
5 RS-232
RS-232 passthrough to receiver
6 UTP/STP OUT
CAT-5 output to receiver of HDBaseT compatible displays
Item
Description
1 IR OUT
IR passthrough from transmitter
2 UTP/STP OUT
CAT-5 input from transmitter or HDBaseT compatible devices
3 IR IN
IR passthrough to transmitter
4 DC 24V
Power 24V DC
(Note: Power adaptor is not supplied with receiver HDBT-GAHD11R/AP1)
5 RS-232
RS-232 passthrough from transmitter
6 HDMI OUT
HDMI output to display