Abtus ABT4650 RouteScan Скачать руководство пользователя страница 28 | Manualshive

Страница: 28 / 31

Abtus ABT4650 RouteScan Скачать руководство пользователя страница 28

27

4650-60 Issue 01

9.6 Measurement Takes a Long Time

The time taken to perform a point measurement is dependent on surface quality.
Surfaces that are too shiny or too dull will affect the measurement time. On
standard brickwork or masonry, RouteScan can complete up to 240
measurements per second.

RouteScan has been benchmarked on the same calibration surface as is used for
calibrating the Structure Gauging Train in the UK and has been proven to work
reliably.

When using RouteScan to measure Gauge and SE in Single Point mode; ensure
that the laser is pointing at a near-by surface to minimise measurement time.

9.7 Refresh radio list

Bluetooth receivers (radio) installed have to appear in the list with the value ‘true’.
If this value is ‘false’ you have to refresh the radio list. Click on ‘Refresh radio list’
button, select the radio (API) and press ‘Make Connectable’ button.

9.8 Restore data

The restore data process is a very sensitive one. Please ensure you
understand it before do it. Don’t hesitate ask the manufacturer if in any
doubt.

If the Routescan’s calibration file fails then the Routescan will produce incorrect
results.

«
...
26
27
28
29
30
...
»

Содержание ABT4650 RouteScan
































Отзывы:

Нет отзывов