3 SETUP
The Plug & Test
®
connector must be inserted into the receptacle of the indicator with the side marked
“Plug & Test
®
Technology” facing up (see Fig. 3.1). When fully inserted, the connector will lock into place
with a “click”.
Fig. 3.1
Appropriate orientation of the Plug & Test
®
connector.
To release the connector, press both buttons on either side of the indicator housing (see Fig. 3.2). Pull
the connector completely out of the indicator by holding the curved aluminum section.
DO
NOT
pull on
the cable or strain relief.
Fig. 3.2
Press both buttons on either side of the indicator housing to release the Plug & Test
®
connector.
