Abov MC96FM204, Руководство пользователя

Страница: 56 / 172

MC96FM204/FM214
56 April 7, 2016 Ver. 1.8
9.3 P0 Port
9.3.1 P0 Port Description
P0 is 8-bit I/O port. P0 control registers consist of P0 data register (P0), P0 direction register (P0IO), debounce
enable register (P0DB), P0 pull-up resistor selection register (P0PU), and P0 open-drain selection register
(P0OD). Refer to the port function selection registers for the P0 function selection.
9.3.2 Register description for P0
P0 (P0 Data Register) : 80H
7 6 5 4 3 2 1 0
P07 P06 P05 P04 P03 P02 P01 P00
R/W R/W R/W R/W R/W R/W R/W R/W
Initial value : 00H
P0[7:0]
I/O Data
Note) Do not use the
“direct bit test and branch” instruction for input port, more detail information is at
Appendix B.
Example) Avoid direct input port bit test and branch condition as below
If(P00)
→
if(P0 & 0x01)
P0IO (P0 Direction Register) : 91H
7 6 5 4 3 2 1 0
P07IO P06IO P05IO P04IO P03IO P02IO P01IO P00IO
R/W R/W R/W R/W R/W R/W R/W R/W
Initial value : 00H
P0IO[7:0] P0 Data I/O Direction.
0 Input
1 Output
NOTE:
SCK-in/SS/EC1/EINT11 function possible when input
P0PU (P0 Pull-up Resistor Selection Register) : 93H
7 6 5 4 3 2 1 0
P07PU P06PU P05PU P04PU P03PU P02PU P01PU P00PU
R/W R/W R/W R/W R/W R/W R/W R/W
Initial value : 00H
P0PU[7:0] Configure Pull-up Resistor of P0 Port
0 Disable
1 Enable