A31G324RLN shield board implementation guide
3. Building and running project (Shield board)
19
3.4.3
Downloading EBI_LCD
If the compilation finishes without any error, you can begin programming the Starter Kit.
1.
Check the followings if errors occur during the setup process.
A.
Check that CMSIS-DAP Debugger (
①
) is selected in the Debug tab (use CMSIS-DAP for
A-Link).
B.
Click Settings and check that A-Link CMSIS-DAP (
②
) is selected in the Debug tab.
C.
Check that the correct flash loaders of the device (
③
) are displayed in the Flash Download
tab.
Figure 19. Check to EBI_LCD Project Setting
2.
Downloading is enabled since the Starter Kit is connected to the USB port of the PC.
3.
Click Download (
①
) to download. Check the settings if you encounter errors.
Figure 20. Download EBI_LCD Project on A-Link
①
②
③
①
Download