- 1-
BroadBand
Router
(with 4-Port EtherSwitch)
Quick Installation Guide
M73-APO07-390
STEP 1: CABLING
Figure 1
Cable/xDSL
modem
ISP
Internet
UTP Ethernet standard
/cross-over cable
1-1
1-2
1-3
1-3
1-3
1-3
1-1. Connect the power adapter to this product and power it on.
The LED of
Power
will illuminate after this step.
1-2. Apply the UTP cable to connect your Cable/DSL modem to this product’s Internet port.
The LED of
Internet
will illuminate after this step.
1-3. Use a network cable to connect your PCs’ Ethernet ports to one of this product’s LAN (1
to 4) ports.
The LED of
LAN
port you plugged into will illuminate after this step.
STEP 2: INSTALLING WIZARD
Note: To configure this device, you must have IE 4.01 or above installed.
1. Load the setup CD-ROM onto your computer. The
auto-execution file will start
automatically.
