第6页
1.5
Time Setting
Note: Time setting needs to be done through the wire controller.
Step 1.
Plug the wire controller into the hostline controller socket.
Step 2.
Press the "Time" button of the wire controller, the system time dialog box pops up on
the host screen. As shown below
：
Step 3.
The system time is set according to the current time by operating the keys on the wire
controller.
Step 4.
When the setting is complete, click "OK" to confirm that the OK display appears on
the side, and then press the "Exit" key or "Time" key to return to the monitoring screen.
ICON
ITEM
FUNCTION
Time Setting
Press 1 to enter the time setting
Confirm
Must move the cursor to “CONFIRM”, then press it to finish the
time setting.
Composite Button Composite Button, it is “PLAY/PAUSE” in playback mode; it is
“PLUS 1” each time in the time setting.
Left Shift
Cursor moves to the left
Confirm the current setting time.
If the time is successfully
changed, an "OK" hint will pop
up after confirmation.
