
saO-ME@
MODEL NO.11.1200
Permanent
Mount Low Profile
LED Mini Bar
GENERAL INFORMATION:
The saG-ME
@
Low Profile LED Mini Bar is equipped with a Solid State Flasher. The flasher has
7 flash patterns including random. To change flash patterns momentarily apply +12v to the white, mode wire.
Each time +12v is applied, the flash pattern will change.
FLASH PATTERNS
Double Alternating
Quad Alternating
Quint Alternating
Mega Alternating
Double Simultaneous
Quad Simultaneous
Random
INSTALLATION INSTRUCTIONS:
Determine location to mount your Low Profile LED Mini Light Bar. Do not install this product or route any wires in the
deployment area of your air bag. Equipment mounted or located in the air bag deployment area will damage or reduce the
effectiveness of the air bag, or become a projectile that could cause serious personal injury or death. Refer to your vehicle
owners manual for the air bag deployment area. The User/Installer assumes full responsibility to determine proper
mounting location, based on providing ultimate safety to all passengers inside the vehicle.
WARNING: The steel content of vehicle roofs varies considerably and some may not be suitable for mounting warning
lights with magnetic bases. It is the sole responsibility
of the users of magnetic based lights to determine if portable
warning lights may be safely used on the exterior of their vehicle.
If mounting this product requires drilling holes, the installer MUST be sure that no vehicle components or other vital
parts could be damaged by the drilling process. Check both sides of the mounting surface before drilling begins. Also de-
burr any holes and remove any metal shards or remnants. Install grommets into all wire passage holes.
Use only soap and water to clean the outer lens. Use of other chemicals could result in premature lens cracking
(crazing) and discoloration. Lenses in this condition have significantly reduced effectiveness. Inspect and operate this
product regularly to confirm its proper operation and mounting condition. Do not use a pressure washer to clean this
product.
PRODUCTS
COMPANY.
804 East Hwy. 248
. Cassvllle,MO 65625
U.S. and Canada Toll Free Numbers.
Phone: 800-641-4098 FAX: 800-526-1240
E-mail: sa/[email protected]
WEB: www.able2products.com
11,00