ABL Wallbox eM4 Single, Руководство по установке, Страница: 19 / 68

19 Accessories
x
Drilling template, 1 pc.
x
Operating manual & safety information
(multilingual), 1 pc.
x
Folding ferrite with key, for interference
suppression in the low-frequency range,
1 pc.
The Controller variants of the Wallbox eM4 Single also include:
x
LTE USB stick for installing an optionally
available SIM card for communication
with a backend, 1 pc.
x
USB filter for interference suppression
of data transmission via the LTE USB
stick, 1 pc.
The reev ready variants of the Wallbox eM4 Single also include:
x
Envelope with reev onboarding guide,
reev RFID test key, reev QR codes, 1 pc
x
reev charging key (included in enve-
lope), 2 pcs.
x
Controllers only:
LTE USB stick with SIM
card for communication with the reev
backend, 1 pc.
x
Controllers only:
USB filter for inter-
ference suppression of data transmis-
sion via the LTE USB stick, 1 pc.
NOTE
Checking the components included
Check immediately after unpacking whether all components are included: should any components be missing, please contact the
dealer from whom you purchased the wallbox.
Accessories
The following accessories for the Wallbox eM4 Single are available separately:
x
CC3225
Type 2 charging cable according to IEC 62196-2, up to 32 A 480 V AC, 3-phase,
length 2.5 m
x
CC3250
Type 2 charging cable according to IEC 62196-2, up to 32 A 480 V AC, 3-phase, length 5 m
x
CC3275
Type 2 charging cable according to IEC 62196-2, up to 32 A 480 V AC, 3-phase, length
approx. 7.5 m
x
CC3210
Type 2 charging cable according to IEC 62196-2, up to 32 A 480 V AC, 3-phase, length
approx. 10 m