ABL eMC2, Руководство пользователя, Страница: 21 / 44

INSTALLINg ThE ChARgINg pOLE
17
• For safe return, transporting the pole fixed to a pallet is recommended.
• Please note that the transport weight of the
eMC2
charging station including all
packaging materials may necessitate the use of a forklift.
Mechanical installation on the EMC9999 foundation block
For installation described as follows, the separately available
EMC9998
or
EMC9997
plinths are required. For installation on the EMC9999 foundation block you will need
the following components:
• Four M12 x 20 stainless steel hexagonal head bolts for fixing the plinth to the foun-
dation block (included with the foundation block)
• Four washers for M12 x 20 hexagonal head bolts, minimum external diameter 37
mm, (included with the foundation block)</7
• Torque wrench suitable for M12 x 20 hexagonal head bolts (size 18/19 mm, not
included)
• Spirit level if required (not included)
DANGER!
During the entire installation process, the safety switches for all supply
cables to the eMC2 must be deactivated: Supply cables must under all
circumstances be non-live and may only be reconnected to the electricity
grid for taking the device into electrical operation at the conclusion of the
installation process.
1. Thread the power supply through the central opening in the plinth. Ensure that the
supply cable protrudes sufficiently (> 50 cm) from the high temperature plastic
tube in the foundation block.
2. Position the four fixing holes in the base plate of the plinth above the threaded
anchors in the foundation.
• If you are using the
EMC9998
plinth, select the outer openings, which are 218
mm apart (widthwise).
• If you are using the EMC9997 plinth, select the inner openings, which are 89
mm apart (widthwise).
3. Insert the four included M12 x 20 bolts through the matching washers and the
openings in the plinth into the threaded anchors in the foundation block and tighten
them using the torque wrench. For the prescribed strength grade 8.8, the tighten-
ing torque should be 35 Nm.