Identifying your wallbox |
9
Introduction to the Wallbox eM4 Twin
Thank you for choosing the Wallbox eM4 Twin from ABL. The eM4 Twin is the ideal solution for efficient vehicle
charging in private environments, in public areas and for large group solutions in semi-public company or hotel car
parks. In addition to the simple mechanical and electrical installation, the
ABL Configuration App
for mobile devic-
es (iOS, Android) ensures a quick and straightforward setup.
The Controller and Extender variants of the Wallbox eM4 Twin are also available as reev ready versions with backend
solutions by
reev
, which offer an intuitive interface for the administration and invoicing of all charging operations.
Further information on technical data is available in the appendix from page 62.
Identifying your wallbox
The model variant of the Wallbox eM4 Twin can be unambiguously identified on the rating plate located on the inside
of the housing cover. Please verify the information listed below on the rating plate.
The following information is especially relevant:
Model number and indication of product category (Controller or Extender)
Mains connection
A
Model number and category
(Controller or Extender)
F
Type specification (eM4 Twin)
K
Disposal advice
B
Connection requirements
G
Manufacturer and manufacturer's
address
L
Barcode/serial number
C
Temperature range
H
Manufacturer's logo
M
Date printed
D
Degree of protection (housing)
I
DataMatrix code/product number
N
Authorised representative
(UKCA)
E
Standards
J
'Read instructions' advice
O
Symbol protection class II
P
CE / UKCA marking
100000XX00484
2022-12-18 1123655348711
1xxxxxxxxx
K
A
E
D
B
G
H
I
O
C
F
P
J
L
M
N