| Appendix
64
Product number
100000004
Operating temperature
-25°C to 40°C
Storage temperature
-25°C to 70°C
Relative humidity
5 to 95%, no condensation
Class of protection
II
Degree of protection (housing)
IP55
Overvoltage category
III
Degree of pollution
3
Impact strength
IK10
Power dissipation
7 W
Maximum elevation
≤ 2,000 m AMSL
Dimensions (H × W × D)
515 × 428 × 145 mm (width without overhangs: 395 mm)
Weight per wallbox
Approx. 10.5 kg
The Wallbox eM4 Twin Extender is also available as a variant with a shutter charging socket. In line with the Control-
lers, the Extender wallboxes are also available as reev ready variants. The basic technical data are identical in each
case; the corresponding product numbers can be found in the following table:
Extender with shutter
Extender with shutter and reev ready
100000024
100000185
Standards and guidelines
General standards
2014/30/EU
EMC Guideline
2011/65/EU
RoHS Guideline
2012/19/EU
WEEE Directive
2014/35/EU
Low voltage directive
2014/53/EU
Radio Equipment Directive
Standards governing electromagnetic interference (EMV)
IEC 61851-21-2
Conductive charging systems for electric vehicles – Part 21-2: EMC requirements for off
board electric vehicle charging systems
Device safety standards
IEC 61851-1 Ed. 3
Electrical equipment for electric road vehicles - conductive charging systems for electric
vehicles – Part 1: General requirements
IEC 60364-7-722 Ed. 1
Low voltage installations - Part 7-722: Requirements for special installations or locations -
Supply of electric vehicles
IEC 61439-7
Switchgear combinations for specific applications such as marinas, campsites, marketplac-
es, charging stations for electric vehicles
IEC 62955
Residual direct current detecting device (RDC-DD) to be used for mode 3 charging of elec-
tric vehicles