Abit IS7-V Скачать руководство пользователя | Manualshive

Страница: 59 / 80

background image

BIOS Setup

3-21

3-8. PC Health Status

FAN Fail Alarm Selectable:

This item selects the fan that will be monitored for malfunction.

Shutdown When CPUFAN Fail:

When set to [Enabled], the system will be shut down if the CPU fan is not running.

Shutdown Temperature:

This item sets the temperature that would shutdown the system automatically in order to prevent system
overheats.

CPU Warning Temperature:

This item selects the CPU’s warning temperature limit. Once the system has detected that the CPU’s
temperature exceeded the limit, warning beeps will sound.

NOTE:

The onboard hardware monitor function is capable of detecting these system health conditions. If

you want a warning message to pop-up or a warning alarm to sound when an abnormal condition occurs,
you must install the “Hardware Doctor” utility. This utility is included in the “Driver & Utility CD” that
came packed with this motherboard.

All Voltages, Fans Speed and Thermal Monitoring:

These unchangeable items list the current status of the CPU and environment temperatures, fan speeds,
and system power voltage.

NOTE:

The hardware monitoring features for temperatures, fans and voltages will occupy the I/O

address from 294H to 297H. If you have a network adapter, sound card or other add-on cards that might
use those I/O addresses, please adjust your add-on card I/O address to avoid using these addresses.

User’s Manual

«
...
57
58
59
60
61
...
»

Содержание IS7-V

















































































Отзывы:

Нет отзывов

Похожие инструкции для IS7-V

Бренд: Rabbit Страницы: 144

Бренд: Intel Страницы: 6

Бренд: Avalue Technology Страницы: 12

Бренд: MIPS Страницы: 10

Бренд: MSI Страницы: 169

Бренд: TYAN Страницы: 90

Бренд: Energy Страницы: 14

Бренд: Advantech Страницы: 116

Бренд: IEI Technology Страницы: 156

Бренд: Biostar Страницы: 115

Бренд: Gigabyte Страницы: 87

Бренд: Supermicro Страницы: 105

Бренд: OMS Страницы: 11

Бренд: Gigabyte Страницы: 116

Бренд: Yamaha Страницы: 118

Бренд: Yamaha Страницы: 129

Бренд: Yamaha Страницы: 124

Бренд: Yamaha Страницы: 108

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды