Abit IS7-V Скачать руководство пользователя

Страница: 44 / 80

3-6

Chapter 3

[EGA/VGA]:

(Enhanced Graphics Adapter/Video Graphics Array) For EGA, VGA, SVGA and PGA

monitor adapters.

[CGA 40]:

(Color Graphics Adapter) Power up in 40-column mode.

[CGA 80]:

(Color Graphics Adapter) Power up in 80-column mode.

[Mono]:

(Monochrome adapter) Includes high-resolution monochrome adapters.

Halt On:

This item determines whether the system stops if an error is detected during system boot-up.

[All Errors]:

The system-boot will stop whenever the BIOS detect a non-fatal error.

[No Errors]:

The system-boot will not stop for any error detected.

[All, But Keyboard]:

The system-boot will stop for all errors except a keyboard error.

[All, But Diskette]:

The system-boot will stop for all errors except a diskette error.

[All, But Disk/Key]:

The system-boot will stop for all errors except a diskette or keyboard error.

Base Memory:

This item displays the amount of base memory installed in the system. The value of the base memory is
typically 640K for system with 640K or more memory size installed on the motherboard.

Extended Memory:

This item displays the amount of extended memory detected during system boot-up.

Total Memory:

This item displays the total memory available in the system.

IS7-V

Содержание IS7-V

















































































Результаты поиска

Содержание IS7-V

Отзывы:

Похожие инструкции для IS7-V

Бренды по названию

Популярные бренды

Abit IS7-V, Руководство пользователя

Результаты поиска

Содержание IS7-V

Отзывы:

Похожие инструкции для IS7-V

Бренды по названию

Популярные бренды