
10
GB: English Manual Gewa IR-1SP Micro
Introduction
The Gewa IR-1SP Micro is a programmable IR transmitter, which can learn one channel
from another remote control for TV, DVD, stereo etc.
The Gewa IR-1SP Micro is a part of the
“GewaLink-system” and therefore can be used
together with all of these products.
General information about Gewa IR-1SP Micro
Before using your IR-1SP Micro there are certain things that you should know:
On delivery the GewaLink channel 16 is factory programmed, meaning that it is
possible to use the transmitter immediately after the batteries has been inserted. See
section
Inserting Batteries
.
For programming press the programming button
P
(using a pen tip or other narrow
object) at the
same time
as you press the function button
O
.
If you press the wrong button or make a mistake when programming you can always
press the programming button
P
. It works as a
Reset
-button.
It is important not to wait too long between the different steps when programming. After
a certain time your IR-1SP Micro automatically leaves the programming mode to save
power.
3.0
as a superscript indicates the IR-1SP Micro version.
This picture shows the various terms and functions which are described in the text.
The following symbols appear in the text throughout this manual:
P
= programming button
O
= function button on the IR-1SP Micro
Y
= Any button on another transmitter to be programmed
Fig 1
GEWA AB
Programming button
P
(reset)
Indicator light
Function button
O