Preparations
15
Settings of the Alert function
An "Alert" function is activated when you press the external switch and hold it
for the configured number of seconds. The function activates an IR signal, a
GEWA Radio signal or a relay output. The Multibox restarts automatically
when the "Alert" function has been activated.
The "Alert" function can also be activated through a function button. See
To set up the "Alert" function
1.
Tap "Alert" in GEWA Settings.
2.
Enable the "Alert" function, select type and do the instruction steps.
To edit time for "Alert" settings
1.
Tap "Alert" in GEWA Settings.
2.
Select Alert delay and tap - or +.
WARNING:
The "Alert" function must not be used as an emergency
alarm and never be used if a person is in danger if the "Alert" function
fails. The batteries can become empty, the external switch can be
accidentally disconnected or out of reach, the mobile phone network can
be down, etc.