Abicor Binzel xFUME FLEX, Руководство по эксплуатации, Страница: 41 / 92

xFUME FLEX 9 Maintenance and cleaning
BAL.0733.0 • 2021-01-11
EN - 19
9.3 Primary filter
The primary filter cannot be cleaned; it must be completely replaced.
9.3.1 Replacing the primary filter
9.4 Cleaning outer surfaces
1 Clean outer surfaces with a suitable industrial vacuum cleaner (dust class H according to DIN EN 60335-2-69
Appendix AA) or a damp cloth.
2 Dispose of cleaning residues/cloths in accordance with local regulations.
Figure Action

Fig. 5 on page EN-15 1 Switch off the welding fume extraction system at
the On/Off switch
(4) .
Without 2 Pull out the mains plug.
Without 3 Unlock and open the service door using a square
wrench.
4 Remove the primary filter.
Without 5 Dispose of the primary filter in accordance with local
regulations.

12 Disposal on page EN-23
6 Insert the new primary filter in xFUME FLEX.
Without 7 Close the service door and lock it using a square wrench.
Tab. 9 Replacing the primary filter