Abicor Binzel WH, Руководство по эксплуатации

Страница: 50 / 108

EN - 22 BAL.0014 • 2019-01-16
9 Maintenance and cleaning WH / WHPP
9.1 Wire guide
1 Unscrew the hose assembly on the machine side and bring it into a stretched position.
2 Unscrew liner nut and pull out guide spiral liner or PA liner.
3 Clean wire feed hose from both sides with compressed air.
4 Slide adjusted guide spiral liner or PA liner into wire feed hose and secure with spigot nut.
9.2 Guide spiral liner
1 Slide guide spiral liner (1) through the wire feed hose (2) until a noticeable resistance (6)
is felt in the connector nipple.
2 Determine excess length x at the central plug (3) and pull out guide spiral liner (1) .
WARNING
Risk of injury
Serious injuries caused by parts swirling around.
• When cleaning the wire guide with compressed air, wear suitable protective clothing, in
particular safety goggles.
NOTICE
• New still unused guide spiral liners or PA liners have to be shortened to the actual length
of the hose assembly.
• The PA liner is attached in a similar way to the spiral liner. For more information, please
see the wire feeder manufacturer’s operating instructions.
• PA liners are used for aluminium. PA liners and attachment materials are available on
request.
1 Guide spiral liner
2 Wire feed hose
3 Central plug
4 Liner nut
5 Side cutting pliers
6 Stop
Fig. 17 Guide spiral liner
x
x
2 - 3mm
1 2
5
6
3
4